FAST, Speedmaster®

Ford SB 289 302 Windsor + FAST EZI-EFI 2.0 Fuel Injector System - Black

No Reviews yet
MPN: 1-135-012 UPC: 840136500278
Available Extended Warranty Eligible
US $3,390.00

Out of Stock


Welcome to the new era in fuel injection! Speedmasterª & FAST line of EFI systems are all you need when deciding to upgrade your engine to modern electronic fuel injection. Our EFI systems provide excellent throttle response throughout the RPM range along with smooth engine operation. They also offer the potential for improved fuel economy by making the engine more efficient. Speedmasterª EFI systems give you everything you need to add powerful and efficient fuel injection to your vehicle.


Part Number:1-135-012
Part Type:Fuel Injection Systems
Engine Block Style:Stock/OEM standard deck
Injection Style:8 Throttle body
Basic Operating RPM Range:Idle-7,000
Intake Trumpets:Intake Trumpets Included
Injectors Included:No
Fuel Rails Included:Yes
Throttle Body Included:8 Pieces
Base Material:Aluminum Casting
Base Finish:Black
Quantity:Sold individually
EFI Sensor Kit (Recommendation):PCE651.1002
Notes:Includes Fast EFI 30404 Kit Management System and harness.


The Speedmaster Individual throttle body EFI system have all the flash of classic Weber induction but provide higher state of tune and engine performance versatility of EFI. Delivering crisp EFI performance with systems capable of supporting high hp. Fuel and air is delivered through precision cast aluminum 50mm IDA style throttle bodies that allow for superior idle characteristics and astounding throttle response while improving emissions and economy through tight air/fuel ratio control.

Speedmaster linkage set incorporates the throttle stops, idle controls, lever arms and joiner/balancer all in one. It also features a single screw adjustment for calibrating front to rear throttle shafts.

The bell crank has a fully indexable eccentric cable pulley that enables good slow speed drivability and still attain full throttle geometry.

Speedmaster throttle bodies have the following feature:

- CNC machined, Heat treated 601 Cast aluminum.
- Butterflies are measured for each bore & precision machined to a closer tolerance.
- Butterflies are secured to centerless ground brass shafts with split screws to ensure reliability and serviceability.
- O-ring seals on lower mounting faces.

EFI Sensor Kit: PCE651.1002

Additional Notes:
O-O distance is measured from the center of the top and bottom o-rings.

Will work with any speed density controller.

The Fast FST30404 unit can be used if the vehicle will be driven daily, it is self learning and will require driving after installation to self adjust. If the vehicle is more of a show car or performance based we recommend FST303000 as it is tunable with laptop and can be set to perfect adjustment immediately, does not require drive time to learn.

Prop 65 Warning

This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.

Ratings & Reviews

No reviews available

Be the first to Write a Review